All Products
-
Micro Stepper Motor
-
Permanent Magnet Stepper Motor
-
Geared Stepper Motor
-
Linear Stepper Motor
-
Slider Stepper Motor
-
Hybrid Stepper Motor
-
Small DC Gear Motor
-
ROV Thruster Motors
-
Micro Metal Gearmotor
-
Micro Gearbox
-
Position Control Stepper Motor
-
3D Printer Stepper Motor
-
Stepper Motor Driver
-
DC Motor Controller
-
Lead Screw And Nut
-
Andres BlancoThe thruster have arrived correctly. I tested them on the ROV and we are very happy with the result. The epoxy interior finish is very good and the power of the motors in relation to the size is quite good. -
Gregoire LangeThe cooperation between Changzhou Vic-Tech Motor Tech and our company was just great. Good understanding of our needs, great willing to solve our problems. I recommend !
-
David MoleveltProfessional and clear communication. Order was shipped in time. Counter connectors where added to the shipment. Driver works like we agreed !
-
Buildstorm Private LimitedThe product works as expected, it was packed nicely. Seller responds very quickly and helps in making a buying decision. They are ready to customize the product for you.
-
Ashley GriffinShipment was received very quickly. Product was well protected by packaging. Company rep was cordial and kind. A Plus rating!
Keywords [ stepper motor used in printers ] match 200 products.
Custom Shaft Linear Stepping Motor 15 Degree Step Angle 12V 25mm Diameter
| Phase Inductance: | 55(±10%）Ohm/20C |
|---|---|
| Phase Current: | 0.21mA |
| Step Angle: | 15° |
Efficient 28mm High-Torque 28BYJ48 Unipolar 4 phases 64:1 ratio geared reducer stepping motor
| Type: | Gearbox Stepper Motor |
|---|---|
| Phase No.: | 4 Phases (Uni-polar) |
| Coil Resistance: | 100Ω/phase |
2.4~6V Load Speed 12250 RPM Brush DC Gear Motor With Worm Gear Box $3~$8.5/unit
| Voltage: | 2.4~6( V ) |
|---|---|
| Output Power: | 0.1~1.6( W ) |
| Type: | DC Motor |
Planetary Gearbox Plus Micro Metal Gearmotor Low Speed Big Torque VSM10-IG64
| Voltage: | 5V |
|---|---|
| Type: | DC Motor |
| Usage: | Door Locks And 3D Printers |
High-Precision 15mm Motor+Worm Gearbox for Motor Applications
| Motor Type: | 15mm Motor+worm Gearbox |
|---|---|
| Rated Voltage: | 5V DC |
| Gearbox Type: | Worm Gearbox |
Slider Linear Stepping Motor 80mm Travel Distance M3 Lead Screw 15mm Diameter Stroke About 80mm
| Motor Type: | PM Stepper Motor+slider |
|---|---|
| Motor Diameter: | 15 Mm |
| Coil Resistance: | 15Ω/phase |
Micro M10 Brushed DC Motor With Gearbox Reducer 5V Lead Screw Shaft M3*0.5P $2.5~6/unit
| Type: | M10 Brushed DC Motor |
|---|---|
| Gearbox Type: | GM10 (8*10mm) |
| Output Shaft Type: | M3*0.5P |
28mm 28BYJ48 Unipolar 4 phases 64:1 ratio geared reducer stepping motor
| Type: | Gearbox Stepper Motor |
|---|---|
| Phase No.: | 4 Phases (Uni-polar) |
| Coil Resistance: | 100Ω/phase |
3D Printer Accessories T8 Trapezoidal Screw Lead Screw Nut Length Customized
| Screw Outer Diameter: | 8mm |
|---|---|
| Thread Tolerance: | 4h |
| Product Number: | TR8 |
T Type Lead Screw And Nut / Screws And Bolts Hardware National Standard
| Screw Outer Diameter: | 8mm |
|---|---|
| Thread Tolerance: | 4h |
| Product Number: | TR8 |