All Products
-
Micro Stepper Motor
-
Permanent Magnet Stepper Motor
-
Geared Stepper Motor
-
Linear Stepper Motor
-
Slider Stepper Motor
-
Hybrid Stepper Motor
-
Small DC Gear Motor
-
ROV Thruster Motors
-
Micro Metal Gearmotor
-
Micro Gearbox
-
Position Control Stepper Motor
-
3D Printer Stepper Motor
-
Stepper Motor Driver
-
DC Motor Controller
-
Lead Screw And Nut
-
Andres BlancoThe thruster have arrived correctly. I tested them on the ROV and we are very happy with the result. The epoxy interior finish is very good and the power of the motors in relation to the size is quite good. -
Gregoire LangeThe cooperation between Changzhou Vic-Tech Motor Tech and our company was just great. Good understanding of our needs, great willing to solve our problems. I recommend !
-
David MoleveltProfessional and clear communication. Order was shipped in time. Counter connectors where added to the shipment. Driver works like we agreed !
-
Buildstorm Private LimitedThe product works as expected, it was packed nicely. Seller responds very quickly and helps in making a buying decision. They are ready to customize the product for you.
-
Ashley GriffinShipment was received very quickly. Product was well protected by packaging. Company rep was cordial and kind. A Plus rating!
Keywords [ stepper motor used in printers ] match 214 products.
4 Lead Wires Hybrid Stepper Motor with 3/4A Current and 2.5/4.5/3.3/4.5mH Inductance
| Type: | Hybrid Stepper Motors |
|---|---|
| Voltage (V): | 2.3 / 3 / 3.1 / 3.8 |
| Ambient Temperature: | -20℃ ~ +50℃ |
Micro Stepper Motor 18 ° Step Angle 3.3V DC mini Stepper Motor for 2 phase 4 wire stepping motor in camera small space
| Voltage: | 3.3V |
|---|---|
| Holding Torque: | 0.8g.cm/900pps |
| Insulation Resistance: | 1MΩ DC100V |
VIDEO
PM Stepper Motor With Gearbox 2.2V-12V Rated Voltage Thrust >70N
| Thrust: | ＞70N |
|---|---|
| Step Angle: | 7.5°/10 |
| Motor Size: | 25mm |
3.3-5 V DC Slider Stepper Motor - 2000Hz Min Max Response Frequency 0.02mm Travel per Step
| Lead Screw: | M2*P0.4 |
|---|---|
| Motor Type: | Linear PM Stepper Motor With Slider |
| Motor Diameter: | 8 Mm |
30BYJ46 Low Noise Permanent Magnet Stepper Motor with I Cut Shaft 12V 7.5 °/82.25 Step Angle $0.8~3/unit
| Type: | Gear Motor |
|---|---|
| Construction: | Permanent Magnet |
| Continuous Current(a): | Customized |
30BYJ46 Low Noise Permanent Magnet Stepper Motor with I Cut Shaft 12V 7.5 °/82.25 Step Angle $0.8~3/unit
| Type: | Gear Motor |
|---|---|
| Construction: | Permanent Magnet |
| Continuous Current(a): | Customized |
VIDEO
4 Wire Dual Output Shaft Motor 20mm Geared DC Motor With Cylinder Gearbox
| Motor Type: | PM Stepper Motor+ Gearbox |
|---|---|
| Motor Size: | 20 Mm Diameter |
| Step Angle: | 18°/gear Ratio |
VIDEO
Stroke 40mm 3.3V Dia 10mm Lead Screw Linear Stepper Motor With Bracket Slider
| Step Angle(degrees):: | 18 Degrees |
|---|---|
| Phase: | 2 Phase |
| Voltage: | 3.3 V |
VIDEO
N20 Micro DC Brushed Motor 3- 12V Horizontal Gear Reducer For Shared Bicycle Smart Lock
| Voltage: | 3~12( V ) |
|---|---|
| Type: | DC Motor |
| Usage: | Door Locks And 3D Printers |
VIDEO
Load Speed 2.4~6( V ) 12250 RPM Brush DC Gear Motor With Worm Gear Box for Electtric Door Locks
| Voltage: | 2.4~6( V ) |
|---|---|
| Output Power: | 0.1~1.6( W ) |
| Type: | DC Motor |