All Products
-
Micro Stepper Motor
-
Permanent Magnet Stepper Motor
-
Geared Stepper Motor
-
Linear Stepper Motor
-
Slider Stepper Motor
-
Hybrid Stepper Motor
-
Small DC Gear Motor
-
ROV Thruster Motors
-
Micro Metal Gearmotor
-
Micro Gearbox
-
Position Control Stepper Motor
-
3D Printer Stepper Motor
-
Stepper Motor Driver
-
DC Motor Controller
-
Lead Screw And Nut
-
Andres BlancoThe thruster have arrived correctly. I tested them on the ROV and we are very happy with the result. The epoxy interior finish is very good and the power of the motors in relation to the size is quite good.
-
Gregoire LangeThe cooperation between Changzhou Vic-Tech Motor Tech and our company was just great. Good understanding of our needs, great willing to solve our problems. I recommend !
-
David MoleveltProfessional and clear communication. Order was shipped in time. Counter connectors where added to the shipment. Driver works like we agreed !
-
Buildstorm Private LimitedThe product works as expected, it was packed nicely. Seller responds very quickly and helps in making a buying decision. They are ready to customize the product for you.
-
Ashley GriffinShipment was received very quickly. Product was well protected by packaging. Company rep was cordial and kind. A Plus rating!
Keywords [ stepper motor used in printers ] match 200 products.
Nema 34 (86mm) hybrid ball screw stepper motor 1.8° Step Angle 4 Lead Wires Voltage 3/4.8V Current 6A
Motor Size: | 86mm |
---|---|
Step Angle: | 1.8° |
Voltage (V): | 3 / 4.8 |
PM Stepper Motor With Gearbox 2.2V-12V Rated Voltage Thrust >70N
Thrust: | >70N |
---|---|
Step Angle: | 7.5°/10 |
Motor Size: | 25mm |
10Ω/31Ω Micro Gear Stepper Motor with 15mm Motor+Worm Gearbox
Rated Voltage: | 5V DC |
---|---|
Motor Type: | 15mm Motor+worm Gearbox |
Coil Resistance: | 10Ω/31Ω(single Motor) |
3.3-5 V DC Slider Stepper Motor - 2000Hz Min Max Response Frequency 0.02mm Travel per Step
Lead Screw: | M2*P0.4 |
---|---|
Motor Type: | Linear PM Stepper Motor With Slider |
Motor Diameter: | 8 Mm |
Nema 8 (20mm) hybrid stepper motor, bipolar, 4-lead, ACME lead screw, low noise, long life, high performance
Motor Size: | 20mm |
---|---|
Voltage/Phase: | 2.5 / 6.3V |
Current/Phase: | 0.5A |
Nema 11 (28mm) hybrid ball screw stepper motor 1.8° Step Angle Voltage 2.1 / 3.7V Current 1A,4 Lead Wires
Motor Size: | 28mm |
---|---|
Step Angle: | 1.8° |
Voltage (V): | 2.1 / 3.7 |
Nema 23 (57mm) hybrid ball screw stepper motor 1.8° Step Angle 4 Lead Wires for Medical diagnostic equipment
Motor Size: | 57mm |
---|---|
Step Angle: | 1.8° |
Voltage (V): | 2.3 / 3 / 3.1 / 3.8 |
Small Size Slider Stepper Motor 15mm 8V Trapezoidal Screw With Hexagonal Nut Tr3*1P*2N Lead screw
Motor Type: | Linear Stepper Motor + Lead Screw And Nut |
---|---|
Motor Size: | 15 Mm Diameter |
Step Angle: | 18° |
China VSM1065 10mm Stepper Motor 18 Degrees Step Angle M2 Lead Screw Stepper Motor
Motor Type: | Stepper Motor+lead Screw+ Slider |
---|---|
Motor Diameter: | 10 Mm |
Lead Screw: | M2*P0.5 |
15 Degree Stepper Motor PM 25mm With Run through shaft Motor diameter 25mm for medical equipment
Motor Type: | Permanent Magnet Linear Stepper Motor |
---|---|
Shaft Design: | Run-through Shaft |
Step Angle: | 15°/step |