All Products
-
Micro Stepper Motor
-
Permanent Magnet Stepper Motor
-
Geared Stepper Motor
-
Linear Stepper Motor
-
Slider Stepper Motor
-
Hybrid Stepper Motor
-
Small DC Gear Motor
-
ROV Thruster Motors
-
Micro Metal Gearmotor
-
Micro Gearbox
-
Position Control Stepper Motor
-
3D Printer Stepper Motor
-
Stepper Motor Driver
-
DC Motor Controller
-
Lead Screw And Nut
-
Andres BlancoThe thruster have arrived correctly. I tested them on the ROV and we are very happy with the result. The epoxy interior finish is very good and the power of the motors in relation to the size is quite good. -
Gregoire LangeThe cooperation between Changzhou Vic-Tech Motor Tech and our company was just great. Good understanding of our needs, great willing to solve our problems. I recommend !
-
David MoleveltProfessional and clear communication. Order was shipped in time. Counter connectors where added to the shipment. Driver works like we agreed !
-
Buildstorm Private LimitedThe product works as expected, it was packed nicely. Seller responds very quickly and helps in making a buying decision. They are ready to customize the product for you.
-
Ashley GriffinShipment was received very quickly. Product was well protected by packaging. Company rep was cordial and kind. A Plus rating!
Keywords [ lead screw motor ] match 394 products.
4 Lead Wires Unipolar Stepper Motor 45/55/65/75mm Length High Torque Hybrid Stepper Motor
| Ambient Temperature: | -20℃ ~ +50℃ |
|---|---|
| Lead Wires: | 4 |
| Insulation Resistance: | 100MΩ Min. @500Vdc |
SM08-GB10 8mm diameter bipolar stepper motor with D shaft gearbox
| Gearbox Type: | 10*8 Mm Gearbox |
|---|---|
| Gearbox Ratio: | 20:1~250:1 |
| Motor Type: | Bipolar Stepper Motor |
SM20-55-T linear stepper motor with linear bearings and brass slider 1 KG thrust
| Motor Type: | Linear Stepper Motor |
|---|---|
| Step Angle: | 18°/step |
| Rated Voltage: | 9V DC |
linear stepper motor with linear bearings and brass slider 1 KG thrust for Camera, Optics, Medical Devices
| Motor Type: | Linear Stepper Motor |
|---|---|
| Step Angle: | 18°/step |
| Rated Voltage: | 9V DC |
Reliable Mini DC Motor Gearbox - 12000-16000RPM Unloaded Speed Average Length 10.5mm
| Gearbox Length: | 9mm/12mm |
|---|---|
| Output Shaft: | D Shaft/M3 Lead Screw |
| Loaded Torque(single Motor): | About 3g*cm |
10mm micro sliding screw permanent magnet linear stepper motor
| Step Angle(degrees):: | 18 ° |
|---|---|
| Phase: | 2 Phase |
| Voltage: | 3.3V CD |
Micro Stepper Motor 10mm Small stepper motor 2 Phase Linear slider motor
| Phase: | 2 Phases |
|---|---|
| Voltage: | 5V DC |
| Resistance: | 15±7% Ohm/PHASE |
25mm Low Noise Reduction Gear Box Stepper Motor Permanent Magnet Stepper Motor
| Coil Type: | Bipolar |
|---|---|
| Torque: | High Torque |
| Construction: | Permanent Magnet |
Low Noise Reduction Gear Box Stepper Motor Permanent Magnet Stepper Motor
| Coil Type: | Bipolar |
|---|---|
| Torque: | High Torque |
| Construction: | Permanent Magnet |
SM15-845G Gear Reduced Stepper Motor 15mm With Protective Case
| Motor Type: | PM Motor+gearbox+case |
|---|---|
| Motor Size: | 15 Mm Diameter |
| Step Angle: | 18°/gear Ratio |