All Products
-
Micro Stepper Motor
-
Permanent Magnet Stepper Motor
-
Geared Stepper Motor
-
Linear Stepper Motor
-
Slider Stepper Motor
-
Hybrid Stepper Motor
-
Small DC Gear Motor
-
ROV Thruster Motors
-
Micro Metal Gearmotor
-
Micro Gearbox
-
Position Control Stepper Motor
-
3D Printer Stepper Motor
-
Stepper Motor Driver
-
DC Motor Controller
-
Lead Screw And Nut
-
Andres BlancoThe thruster have arrived correctly. I tested them on the ROV and we are very happy with the result. The epoxy interior finish is very good and the power of the motors in relation to the size is quite good. -
Gregoire LangeThe cooperation between Changzhou Vic-Tech Motor Tech and our company was just great. Good understanding of our needs, great willing to solve our problems. I recommend !
-
David MoleveltProfessional and clear communication. Order was shipped in time. Counter connectors where added to the shipment. Driver works like we agreed !
-
Buildstorm Private LimitedThe product works as expected, it was packed nicely. Seller responds very quickly and helps in making a buying decision. They are ready to customize the product for you.
-
Ashley GriffinShipment was received very quickly. Product was well protected by packaging. Company rep was cordial and kind. A Plus rating!
Keywords [ lead screw motor ] match 440 products.
High Positioning Accuracy Linear Stepper Motor 13mm Stroke 5 Volt 25mm Diameter 7.5° Stroke Step,angle 13mm
| Motor Diameter: | 25mm |
|---|---|
| Rated Voltage: | 5V |
| Power: | 3.85W |
VIDEO
High Thrust 15 Degree Step Angle 20mm Stepper Motor 3.4W 32mm Stroke
| Motor Diameter: | 20mm |
|---|---|
| Rated Voltage: | 5V |
| Power: | 3.4W |
VIDEO
12V Voltage 24mm Diameter 11.25 Degree Step Angle Permanent Magnet Stepper Motor
| Step Angle: | 11.25°/32 |
|---|---|
| Voltage: | 12V |
| Resistance: | 70Ω |
VIDEO
unipolar stepper motor 24mm Diameter Permanent Magnet Stepper Motor With Gearbox
| Step Angle: | 11.25°/32 |
|---|---|
| Voltage: | 12V |
| Resistance: | 70Ω |
Stepper Motor Linear Actuator with Over 500 Gf Pull-out Thrust - Bi-polar 2-2 Phase
| Lead Screw Type: | M3*0.5Pitch Thread |
|---|---|
| Motor Type: | Stepper Motor With Lead Screw Slide |
| Lead Pitch: | M3 Pitch 0.5mm |
VIDEO
SM08-GB10 8mm diameter bipolar stepper motor with D shaft gearbox
| Gearbox Type: | 10*8 Mm Gearbox |
|---|---|
| Gearbox Ratio: | 20:1~250:1 |
| Motor Type: | Bipolar Stepper Motor |
VIDEO
Reliable Mini DC Motor Gearbox - 12000-16000RPM Unloaded Speed Average Length 10.5mm
| Gearbox Length: | 9mm/12mm |
|---|---|
| Output Shaft: | D Shaft/M3 Lead Screw |
| Loaded Torque(single Motor): | About 3g*cm |
M3*0.5Pitch Thread Linear Stepper Motor Achieving Over 500 Gf Pull-out Thrust at 700 PPS
| Pull-out Thrust: | Over 500 Gf At 700 PPS |
|---|---|
| Max Response Frequency: | Over 1600 PPS |
| Max Starting Frequency: | Over 1100 PPS |
VIDEO
SM10-42L 10mm diameter mini linear actuator stepper motor with bracket and slider
| Motor Type: | Linear Stepper Motor |
|---|---|
| Coil Resistance: | 20Ω/Phase |
| Rated Voltage: | 5V DC |
3.3-5 V DC Slider Stepper Motor - 2000Hz Min Max Response Frequency 0.02mm Travel per Step
| Lead Screw: | M2*P0.4 |
|---|---|
| Motor Type: | Linear PM Stepper Motor With Slider |
| Motor Diameter: | 8 Mm |