All Products
-
Micro Stepper Motor
-
Permanent Magnet Stepper Motor
-
Geared Stepper Motor
-
Linear Stepper Motor
-
Slider Stepper Motor
-
Hybrid Stepper Motor
-
Small DC Gear Motor
-
ROV Thruster Motors
-
Micro Metal Gearmotor
-
Micro Gearbox
-
Position Control Stepper Motor
-
3D Printer Stepper Motor
-
Stepper Motor Driver
-
DC Motor Controller
-
Lead Screw And Nut
-
Andres BlancoThe thruster have arrived correctly. I tested them on the ROV and we are very happy with the result. The epoxy interior finish is very good and the power of the motors in relation to the size is quite good. -
Gregoire LangeThe cooperation between Changzhou Vic-Tech Motor Tech and our company was just great. Good understanding of our needs, great willing to solve our problems. I recommend !
-
David MoleveltProfessional and clear communication. Order was shipped in time. Counter connectors where added to the shipment. Driver works like we agreed !
-
Buildstorm Private LimitedThe product works as expected, it was packed nicely. Seller responds very quickly and helps in making a buying decision. They are ready to customize the product for you.
-
Ashley GriffinShipment was received very quickly. Product was well protected by packaging. Company rep was cordial and kind. A Plus rating!
Keywords [ lead screw motor ] match 396 products.
2 Phase 15mm Miniature Slider Screw Stepper Motor 9V DC Pm Stepper Motor
| Phase: | 2 Phases |
|---|---|
| Voltage: | 9V DC |
| Resistance: | 15±10% Ohm/PHASE(20℃) |
9V DC Pm stepper motor 15mm miniature stepper motor with linear screw nut slider for DIY engraving machine
| Phase: | 2 Phases |
|---|---|
| Voltage: | 9V DC |
| Resistance: | 15±10% Ohm/PHASE(20℃) |
20mm 2.5V 2phase external drive Lead screw Hybrid Linear Stepper Motor for medical equipment
| Motor Size: | 20mm |
|---|---|
| Voltage/Phase: | 2.5 / 6.3V |
| Current/Phase: | 0.5A |
Nema 8 (20mm) hybrid stepper motor, bipolar, 4-lead, ACME lead screw, low noise, long life, high performance
| Motor Size: | 20mm |
|---|---|
| Voltage/Phase: | 2.5 / 6.3V |
| Current/Phase: | 0.5A |
7.5 Degree 12V DC After all journey ≥13mm Permanent Magnet Stepper Linear Motor 25mm For 3D Printer
| Resistance: | 84Ω±7% |
|---|---|
| Phase: | 2 |
| Type: | Permanent Magnet |
25mm PM Mini 12V captive low voltage linear Actuator Stepper Motor 24V mini Linear stepping motor for office automation
| Resistance: | 13Ω±10% |
|---|---|
| Phase: | 2 For 4 |
| Type: | Permanent Magnet |
5V 5mm Diameter Micro Linear Stepper Motor With Gearbox
| Step Angle(degrees):: | 22.5 Degree |
|---|---|
| Phase: | 2 |
| Voltage: | 5 V |
Customized 20mm Captive Linear Stepper Motor With 5VDC Lead Screw Bipolar Holding torque 15N $6.8~$30 /Unit
| Resistance: | 13.5Ω±10% |
|---|---|
| Phase: | 2 |
| Type: | Permanent Magnet |
Compact and Efficient Mini Slider Linear Stepper Motor with Coil Resistance 20Ω/Phase
| Motor Diame: | 20mm |
|---|---|
| Lead Screw: | M3*0.5P |
| Slider Design: | Brass Slider+double Linear Bearings |
Loaded Torque 3g*cm Small DC Gear Motor 2 1 -1000 1 Gear Ratio Rated Voltage 3V-12V DC
| Output Torque: | Single Motor Torque*gear Ratio* Efficiency |
|---|---|
| Motor Type: | N20 DC Motor+gearbox |
| Gearbox Length: | 9mm/12mm |